Skip to main content

"We've detected that you're visiting from {0}. Would you like to switch languages for tailored content?"

3M™ Betafine™ PTG Series Filter Cartridge, PTG020B03BA, 30 in, 0.2 um ABS, 226/Spear, Silicone, 6/Case

Hover over image to zoom

3M™ Betafine™ PTG Series Filter Cartridge, PTG020B03BA, 30 in, 0.2 um ABS, 226/Spear, Silicone, 6/Case

About the product

This absolute-rated, graded-porosity 100% polypropylene pleated filter features Advanced Pleat Technology (APT) that increases the usable filtration surface area while maintaining standard filter dimensions.

Details

  • Category Name : Pleated Membrane Cartridges
  • Overall Length (Imperial) : 30
  • Overall Length (Metric) : 76.2
  • Overall Diameter (Imperial) : 2.8
  • Overall Diameter (Metric) : 7.1
  • Product Type : Pleated Polypropylene Media
  • End Modification : 226 O-Ring and Spear
  • Product Form : Cartridge
  • Filter Type : Surface
  • Grade : PTG020
  • Micron Rating (Absolute) : 0.2
  • Filter Technology : Non-woven
  • Product Series : PTG
  • Brand : Betafine™

Product details

The service life of a pleated filter is often dictated by the accessible surface area. Conventional pleated filters may offer a large gross surface area, but when the media is packed too tightly into the cartridge, only part of the surface area is usable resulting in both flow restrictions and limited contaminant holding capacity. The "blind" or unusable area commonly occurs near the inside diameter where the pleats are packed most tightly. The Betafine PPG and PTG series filter is manufactured using a staggered pleat configuration that, when combined with a novel support material, provides more open space between the pleats.

The APT staggered pleats with increased open area allow for greater contaminant loading between pleats at the inside diameter, while the reduced length pleats take advantage of existing open space closer to the filter's outside diameter. The result is a fully used surface area that provides superior service life.

  • Advanced Pleat Technology Construction for High Surface Area as compared to competitive filters: higher product throughputs for prolonged service life, lower total filtration operating costs, and lower pressure drops for higher flow rates.
  • Absolute-rated Filter Performance. Higher product quality and yields.
  • Graded-porosity Multi-layer Filter Media. Capture of contaminant throughout the filter media to help maximize filter life. Higher contaminant holding capacity.
  • Polypropylene Construction Free of Adhesives and Surfactants. Very low extractable levels for optimum filtrate purity. Broad chemical compatibility for most aggressive process applications.
  • 100% Integrity Tested Versions Available. Prequalification and consistency in critical applications. Suitable for final filtration in many applications.

Product specifications

Product Form
Product Form

Cartridge

Category Name
Category Name

Pleated Membrane Cartridges

Filter Technology
Filter Technology

Non-woven

Grade
Grade

PTG020

Micron Rating (Absolute)
Micron Rating (Absolute)

0.2

Product Series
Product Series

PTG

Brand
Brand

Betafine™

Overall Length (Imperial)
Overall Length (Imperial)

30

Overall Diameter (Imperial)
Overall Diameter (Imperial)

2.8

Overall Length (Metric)
Overall Length (Metric)

76.2

Product Type
Product Type

Pleated Polypropylene Media

Overall Diameter (Metric)
Overall Diameter (Metric)

7.1

End Modification
End Modification

226 O-Ring and Spear

Filter Type
Filter Type

Surface