3M™ LifeASSURE™ IMC Series Filter Cartridge, IMC080F02FK, 20 in, 0.80 um, 222/Flat Cap, PTFE, 6/Case
- 1/9
- 2/9
- 3/9
- 4/9
- 5/9
- 6/9
- 7/9
- 8/9
- 9/9
About the product
3M™ LifeASSURE™ IMC Series Filter Cartridges are naturally hydrophilic Nylon 6,6 filter elements built to meet the exacting requirements of DI water, critical parts cleaning and chemical applications. Using a multi-zone microporous membrane and Advanced Pleat Technology (APT), these high-efficiency filter cartridges provide superior flow with minimal pressure drop, reducing filtration operation costs.
Product details
Enhanced contaminant reduction. Reduced filtration costs.
3M™ LifeASSURE™ IMC Series Filter Cartridge
3M™ LifeASSURE™ IMC Series Filter Cartridges incorporate 3M multi-zone microporous membrane technology. This design features a microporous membrane consisting of a higher porosity zone on the upstream section that provides effective pre-filtration of large particles while a lower porosity section on the downstream side provides a sharp retention cut-off at the rated pore size. This efficient multi-zone structure enhances the surface area, lowers pressure drop and increases contaminant holding capacity and filter lifetime, thereby eliminating the need for multiple filters to achieve the same result.
For existing applications at a given flow rate, filter cartridges with more surface area per cartridge have a lower flux than ones with less surface area. Since filter lifetime is inversely proportional to flux in most applications, 3M™ LifeASSURE™ IMC Series Filter Cartridges provide longer life and require fewer cartridge change-outs.
A high flow rate and constant pressure drop of 3M™ LifeASSURE™ IMC Series Filter Cartridges will also help reduce industrial filtration costs since fewer filters are required for the filtration system. This allows for the use of smaller and less costly filter housings, reducing initial capital investment, filter change-out time and total cost of ownership for the life of the process.
- No IPA pre-wetting required, which avoids a potential source of contamination and chemical interaction, while reducing downtime and hazardous waste disposal
- Reduces potential for micro-bubble formation by not de-wetting in outgassing fluid unlike hydrophobic membranes such as Polypropylene, Polyethylene or PTFE
- Enhanced contaminant reduction capacity results in longer filter life than competing filter cartridges
- Economic alternative to PTFE filter cartridges when compatible
- Superior flow characteristics in a compact design reduces the number of required filter elements
- Increased flow rates provide faster bath clean-up and reduced energy consumption
- Provides a low differential pressure to minimize micro bubble formation
- Increased throughput and filter lifetime lowers cost of ownership
Suggested Applications
- DI Water
- Critical Parts Cleaning
- Chemical Filtration
- Industrial Filtration
- Membrane filtration
Product specifications
| Industries |
Industries
Manufacturing,Microelectronics,Semiconductor manufacturing |
| Product Form |
Product Form
Cartridge |
| Grade |
Grade
IMC080 |
| Micron Rating (Absolute) |
Micron Rating (Absolute)
0.8 absolute, @ 99.9% |
| Product Series |
Product Series
IMC |
| categoryName |
categoryName
Pleated Membrane Cartridges |
| Brand |
Brand
LifeASSURE™ |
| Overall Length (Imperial) |
Overall Length (Imperial)
20 in |
| Overall Diameter (Imperial) |
Overall Diameter (Imperial)
2.76 in |
| Overall Length (Metric) |
Overall Length (Metric)
50.8 cm |
| Product Type |
Product Type
Pleated Membrane |
| Overall Diameter (Metric) |
Overall Diameter (Metric)
7 cm |
| End Modification |
End Modification
222 O-ring & flat cap |
| Filter Type |
Filter Type
Surface |
| FilterTechnology |
FilterTechnology
Membrane |
| Application |
Application
High Purity Chemicals |
Distributors
| Solventum Filtration Distributor | Headquarter Location | Contact | Contact Email | Contact Phone | Website |
|---|---|---|---|---|---|
| A.M. Fluid Equipment, Inc. | Bethany, CT | Ross Nelson | ross.nelson@amfe-filter.com | 203-393-2360 | https://amfluid.com/ |
| BMB Filtration | Jacksonville, FL | Butch Lee | butch@bmbent.net | 904-880-7925 | https://bmbfiltration.com/ |
| Calhoun & De Jong, Inc. | Portland, OR; Seattle, WA | Ed Calhoun | ed@cdisales.com | 1-866-288-5091 | https://cdisales.com/ |
| C.C. Day Company | Minneapolis, MN | Chris Magnine | cmagnine@ccday.com | 763-350-3415 | https://ccday.com/ |
| Danner Associates | Rockland, MA | Brian Danner | bdanner@dannerassoc.com | 781-982-7020 | |
| Eggelhof Incorporated | Houston, TX | Ben Ellis | bellis@eggelhof.com | 832-301-0966 | https://www.eggelhof.com/ |
| Enpro Inc. | Addison, IL | John Burnett | john_burnett@enproinc.com | 314-378-6829 | https://enpro.com/ |
| Filter Equipment Co., Inc. | Wall, NJ | Scott Groh | scgroh@filter-equipment.com | 908-216-3879 | http://www.filter-equipment.com/ |
| George Yardley Company | Santa Ana, CA | Rob Yardley | rob@georgeyardley.com | 714-241-7700 | https://georgeyardley.com/ |
| Hagedorn & Gannon Co., Inc. | Fenton, MO | Ty Van Buren | tvanburen@hgcoinc.com | 636-349-3370 | https://www.hgcoinc.com/ |
| Hatfield and Company, Inc. | Rockwall, TX | Jason Reed | jreed@hatfieldandcompany.com | 832-671-9719 | https://www.hatfieldandcompany.com/ |
| MSC Industrial Supply | Melville, NY | Jim Keating | jim.keating@mscdirect.com | 440-656-8042 | https://www.mscdirect.com/ |
| Rawson Industrial Controls | Daphne, AL | Mike Mercier | mike.mercier@rawsonlp.com | 404-281-5704 | https://rawsonicd.com/ |
| Ryan Herco Flow Solutions | Santa Ana, CA | Bob Lucas | blucas@rhfs.com | 612-889-9248 | https://www.rhfs.com/ |
| SunSource | Addison, IL | Tom Lisy | tom.lisy@sunsrce.com | 440-935-4994 | https://www.sun-source.com/ |
