3M™ Unitek™ Miniature Twin Metal Brackets
About the product
3M™ Unitek™ Miniature Twin Brackets provide all the proven clinical characteristics of full size twin brackets, in a smaller size for greater comfort and improved esthetics.
| Product name and IDs | 3M ID | Arch | Material | Side | Slot Size (Imperial) | Tooth | Hook Type | Adhesive Precoat | Prescription | Slot Size (Metric) | Industries | Trademark2 | categoryName |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
7100306887 | Lower | - | Right | 0.018 in | Second Bicuspid | Distal | - | Roth* | 0.457 mm | Orthodontics | Unitek™ | Brackets |
|
|
7100306886 | Lower | - | Left | 0.018 in | Second Bicuspid | Distal | - | Roth* | 0.457 mm | Orthodontics | Unitek™ | Brackets |
|
7100306885 | Lower | - | Right | 0.018 in | First Bicuspid | Distal | - | Roth* | 0.457 mm | Orthodontics | Unitek™ | Brackets |
|
|
7100306884 | Lower | - | Left | 0.018 in | First Bicuspid | Distal | - | Roth* | 0.457 mm | Orthodontics | Unitek™ | Brackets |
|
|
7100306883 | Lower | - | Right | 0.018 in | Cuspid | Distal | - | Roth* | 0.457 mm | Orthodontics | Unitek™ | Brackets |
Product details
- A microetched base features strength comparable to mesh
- Ample area under tie wings allows easy ligation.
- Torque-in-base design with compound base contour
- A permanent vertical scribe line facilitates more accurate placement of brackets on the long axis for bonding.
- A bi-directional hook eases elastic engagement and presents a smooth labial surface for increased patient comfort.
- Symmetrical tie wings add balance to enhance tie wing strength and improve patient aesthetics.
- A chamfered slot entrance promotes easier and more rapid archwire placement.
- An integral base perimeter ridge facilitates easy flash clean up.
- Permanent recessed I.D. markings provide ready identification.
Legal
*3M Unitek version of this prescription. No endorsement by the Doctor is implied.Product specifications
| Prescription |
Prescription
Roth* |
| Industries |
Industries
Orthodontics |
| Hook Type |
Hook Type
Distal |
| HookType |
HookType
Distal |
| SlotSizeMetric |
SlotSizeMetric
0.559 mm, 0.457 mm |
| Arch |
Arch
Lower, Upper |
| Material |
Material
Stainless Steel |
| categoryName |
categoryName
Brackets |
| Side |
Side
Left, Right, Left/Right |
| Brand |
Brand
Unitek™ |
| SlotSizeImperial |
SlotSizeImperial
0.018 in, 0.022 in |
| Slot Size (Imperial) |
Slot Size (Imperial)
0.022 in, 0.018 in |
| Slot Size (Metric) |
Slot Size (Metric)
0.559 mm, 0.457 mm |
| Category name |
Category name
Brackets |
| Adhesive Precoat |
Adhesive Precoat
Non-coated |
| Tooth |
Tooth
Cuspid, First Bicuspid, Lateral Incisor, Anterior, Second Bicuspid, Central Incisor |
| Trademark2 |
Trademark2
Unitek™ |
| AdhesivePrecoat |
AdhesivePrecoat
Non-coated |
