Clinical Case: Bulk Fill Composite in Class I
April 2, 2024 | Dr. Carlos Fernández Villares
About the Case
Replacing failing composite restorations can be easily done with the use of modern bulk fill composites. The use of multilayering technique for restoring molars and premolars can be a tricky procedure due to the possibility of trapping bubbles between composite layers. In addition, it can result in unfavorable dental anatomy which may subsequently lead to functional problems. The use of bulk fill composites could reduce the risk of problems due to the simplicity of the process. As the placement process is shorter, we have more time to focus on the anatomy and function of our restoration. In this case we show the replacement of a failing composite restoration in first left lower molar, replaced by a bulk fill composite restoration. Utilizing just a few steps and within only 31 minutes from start to finish, bulk fill composite is a great practice tool to use.| Learn more about the products used in this clinical case |
After the cavity preparation, the cavity is selectively etched with phosphoric acid.
3M™ Scotchbond™ Universal Adhesiveopens in a new tab is applied to all cavity walls.
Gentle air drying is applied to evaporate the solvent, and the adhesive is cured according to instructions.
3M™ Filtek™ One Bulk Fill Restorativeopens in a new tab is applied in one increment of 4mm.
The occlusal anatomy is modeled, and the restoration is light cured according to instructions.
In this case, the patient’s natural staining is mimicked using a staining resin.
After final curing, the restoration is finished and polished with the 3M™ Sof-Lex™ Spiral Finishing and Polishing systemopens in a new tab.
The rubber dam is removed.
Final occlusion is checked to ensure there are no premature contact points.
Refer to Instructions for Use (IFU) for complete product information. Results may vary.
