Contacteur membranaire 3M™ Liqui-Cel™ Séries MM
La division Purification et Filtration de Solventum fait désormais partie de Thermo Fisher Scientific. Le segment pour la Filtration de l'Eau Potable reste sous la responsabilité de Solventum. Pour plus d'informations, cliquez ici.
À propos du produit
The 3M™ Liqui-Cel™ MM Series Membrane Contactor is our smallest degassing (debubbling) devices. These devices pack a high membrane surface area into a very small footprint. Used primarily in laboratory and analytical applications, degassing with these small point of use degassers/debubblers may help (a) improve measurement reliability, (b) reduce rework and (c) improve product quality.
Détails du produit
Lab-scale systems producing deionized (DI) water have limited space to incorporate degassing technology. The compact design of the Liqui-Cel MM series allows manufacturers of DI water systems to provide degassed DI water without taking up a lot of space inside the system. Products are available to handle flow rates from 5 ml/min to 3000 ml/min.
About 3M™ Liqui-Cel™ Membrane Contactors
3M™ Liqui-Cel™ Membrane Contactors provide efficient dissolved gas control in a compact design. Capable of adding gases to or removing dissolved gases from compatible liquid streams, these gas transfer devices utilize hollow fibre membrane technology that may help facilities around the world improve operating efficiency, performance and protect product quality.
The presence of dissolved gases, such as oxygen, carbon dioxide, nitrogen and other non-condensable gases can cause a number of difficulties. Process interruptions, yield loss, corrosion, surface defects, unreliable measurement readings, poor product quality, higher operating costs and equipment inefficiency are a few examples of challenges faced by various industries when dissolved gases and air bubbles are not consistently controlled.
The 3M™ Liqui-Cel™ Membrane Contactor product offering includes products made with various materials of construction and a wide-range of flow capacities to meet process and application requirements. Their modular nature makes them easy to incorporate into systems with lower weight and less space than other conventional technologies, such as vacuum towers or forced draft deaerators. 3M™ Liqui-Cel™ Membrane Contactors do not require chemicals in operation and can be an effective alternative to chemical treatment options, such as oxygen scavengers in boiler feedwater or caustic/acid in reverse osmosis (RO) and other deionization systems. This may be particularly advantageous for facilities that want to reduce on-site chemical use as part of their sustainability goals.
How 3M™ Liqui-Cel™ Membrane Contactors Membrane Contactors Work
3M™ Liqui-Cel™ Membrane Contactors utilize microporous or non-porous, semi permeable hollow fibre membrane that is placed inside a contactor housing. In our EXF, SP, and MM-0.5x1 and MM-0.75x1 series membrane contactors, liquid flows around the outside of the hollow fibre membrane while a vacuum and/or sweep gas is applied to the inside of the hollow fibre during operation. In our other MM series membrane contactors liquid and gas flows are opposite: liquid flows inside of the hollow fibre membrane while a vacuum and/or sweep gas is applied to the outside of the hollow fibre.
- Conception compacte pour les espaces étroits
- Idéal pour les tests de validation de concept
- Convient aux applications à faible débit et à l'échelle du laboratoire
- Utilise une membrane à fibres creuses microporeuses, similaire à la série EXF, mais les dispositifs ont, soit un débit transversal de liquide à l'extérieur des fibres, soit un concept de débit parallèle où le liquide s'écoule à l'intérieur de la fibre creuse
Spécifications du produit
| Longueur totale (métrique) |
Longueur totale (métrique)
140 mm, 25 mm |
| Marque |
Marque
Liqui-Cel™ |
| Type de produit |
Type de produit
Contacteur membranaire |
| Série du produit |
Série du produit
MM |
| Diamètre total (en pouces) |
Diamètre total (en pouces)
0.98 in, 0.51 in, 1.69 in |
| Diamètre global (métrique) |
Diamètre global (métrique)
25 mm, 13 mm, 43 mm |
| Longueur totale (impérial) |
Longueur totale (impérial)
5.51 in, 0.98 in |
| Secteurs |
Secteurs
Fabrication |
| Technologie du filtre |
Technologie du filtre
Membrane |
| Nom de la catégorie |
Nom de la catégorie
Contacteurs membranaires pour gaz dissous |