Passer au contenu principal

"Nous avons détecté que vous visitez notre site depuis {0}. Souhaitez-vous changer de langue pour un contenu adapté ?"

->

3M™ Betafine™ PTG Series Filter Capsule, PTG120J02AA01, 20 in, 1.2 µ,Sanitary, 1/Case

La division Purification et Filtration de Solventum fait désormais partie de Thermo Fisher Scientific. Le segment pour la Filtration de l'Eau Potable reste sous la responsabilité de Solventum. Pour plus d'informations, cliquez ici.

Survolez l'image pour zoomer

Survolez l'image pour zoomer

3M™ Betafine™ PTG Series Filter Capsule, PTG120J02AA01, 20 in, 1.2 µ,Sanitary, 1/Case
Betafine(TM) Series, low res photo

À propos du produit

This absolute-rated, graded-porosity 100% polypropylene pleated filter features Advanced Pleat Technology (APT) that increases the usable filtration surface area while maintaining standard filter dimensions.

Détails

  • Seuil en microns (absolu) : 1.2 absolute, @ 99.9%
  • FilterType : Surface
  • OverallLengthMetric : 50.8 cm
  • Marque : Betafine™
  • OverallLengthImperial : 20 in
  • Type de produit : Capsule de filtre
  • ProductSeries : PTG
  • OverallWidthMetric : 7.62 cm
  • EndModification : Sanitary Fitting
  • Largeur totale (impérial) : 3 in
  • Technologie du filtre : Non tissé
  • Nom de la catégorie : Cartouches à membrane plissée

Détails du produit

The service life of a pleated filter is often dictated by the accessible surface area. Conventional pleated filters may offer a large gross surface area, but when the media is packed too tightly into the cartridge, only part of the surface area is usable resulting in both flow restrictions and limited contaminant holding capacity. The "blind" or unusable area commonly occurs near the inside diameter where the pleats are packed most tightly. The Betafine PPG and PTG series filter is manufactured using a staggered pleat configuration that, when combined with a novel support material, provides more open space between the pleats. The APT staggered pleats with increased open area allow for greater contaminant loading between pleats at the inside diameter, while the reduced length pleats take advantage of existing open space closer to the filters outside diameter. The result is a fully used surface area that provides superior service life.
  • Advanced Pleat Technology Construction for High Surface Area as compared to competitive filters: higher product throughputs for prolonged service life, lower total filtration operating costs, and lower pressure drops for higher flow rates.
  • Absolute-rated Filter Performance. Higher product quality and yields.
  • Graded-porosity Multi-layer Filter Media. Capture of contaminant throughout the filter media to help maximize filter life. Higher contaminant holding capacity.
  • Polypropylene Construction Free of Adhesives and Surfactants. Very low extractable levels for optimum filtrate purity. Broad chemical compatibility for most aggressive process applications.
  • 100% Integrity Tested Versions Available. Prequalification and consistency in critical applications. Suitable for final filtration in many applications.

Spécifications du produit

Seuil en microns (absolu)
Seuil en microns (absolu)

1.2 absolute, @ 99.9%

FilterType
FilterType

Surface

OverallLengthMetric
OverallLengthMetric

50.8 cm

Marque
Marque

Betafine™

OverallLengthImperial
OverallLengthImperial

20 in

Type de produit
Type de produit

Capsule de filtre

ProductSeries
ProductSeries

PTG

OverallWidthMetric
OverallWidthMetric

7.62 cm

EndModification
EndModification

Sanitary Fitting

Largeur totale (impérial)
Largeur totale (impérial)

3 in

Technologie du filtre
Technologie du filtre

Non tissé

Nom de la catégorie
Nom de la catégorie

Cartouches à membrane plissée