Passer au contenu principal

"Nous avons détecté que vous visitez notre site depuis {0}. Souhaitez-vous changer de langue pour un contenu adapté ?"

3M™ Betafine™ PTG Series Filter Cartridge

Survolez l'image pour zoomer

3M™ Betafine™ PTG Series Filter Cartridge

À propos du produit

This absolute-rated, graded-porosity 100% polypropylene pleated filter features Advanced Pleat Technology (APT) that increases the usable filtration surface area while maintaining standard filter dimensions.

Options de produit

1- de Produits

Sélectionnez des filtres pour affiner votre liste de produits

Nom de produit Identifiant du produit Largeur totale (impérial) Largeur totale (métrique) Longueur totale (impérial) Longueur totale (métrique) Type de produit Modification finale Type de filtre Seuil en microns (absolu) FilterTechnology Série du produit Marque Nom de la catégorie

Identifiant du produit

7000051413

Largeur totale (impérial)

3 in

Largeur totale (métrique)

7.62 cm

Longueur totale (impérial)

20 in

Longueur totale (métrique)

50.8 cm

Type de produit

Capsule de filtre

Modification finale

Sanitary Fitting

Type de filtre

Surface

Seuil en microns (absolu)

1.2 absolute, @ 99.9%

FilterTechnology

Non tissé

Série du produit

PTG

Marque

Betafine™

Nom de la catégorie

Cartouches à membrane plissée

Détails du produit

The service life of a pleated filter is often dictated by the accessible surface area. Conventional pleated filters may offer a large gross surface area, but when the media is packed too tightly into the cartridge, only part of the surface area is usable resulting in both flow restrictions and limited contaminant holding capacity. The "blind" or unusable area commonly occurs near the inside diameter where the pleats are packed most tightly. The Betafine PPG and PTG series filter is manufactured using a staggered pleat configuration that, when combined with a novel support material, provides more open space between the pleats. The APT staggered pleats with increased open area allow for greater contaminant loading between pleats at the inside diameter, while the reduced length pleats take advantage of existing open space closer to the filters outside diameter. The result is a fully used surface area that provides superior service life.
  • Advanced Pleat Technology Construction for High Surface Area as compared to competitive filters: higher product throughputs for prolonged service life, lower total filtration operating costs, and lower pressure drops for higher flow rates.
  • Absolute-rated Filter Performance. Higher product quality and yields.
  • Graded-porosity Multi-layer Filter Media. Capture of contaminant throughout the filter media to help maximize filter life. Higher contaminant holding capacity.
  • Polypropylene Construction Free of Adhesives and Surfactants. Very low extractable levels for optimum filtrate purity. Broad chemical compatibility for most aggressive process applications.
  • 100% Integrity Tested Versions Available. Prequalification and consistency in critical applications. Suitable for final filtration in many applications.

Spécifications du produit

Type de filtre
Type de filtre

Surface

Seuil en microns (absolu)
Seuil en microns (absolu)

1.2 absolute, @ 99.9%

Largeur totale (métrique)
Largeur totale (métrique)

7.62 cm

OverallLengthImperial
OverallLengthImperial

20 in

Type de produit
Type de produit

Capsule de filtre

EndModification
EndModification

Sanitary Fitting

Largeur totale (impérial)
Largeur totale (impérial)

3 in

Technologie du filtre
Technologie du filtre

Non tissé

Longueur totale (métrique)
Longueur totale (métrique)

50.8 cm

Marque
Marque

Betafine™

GLBL_CAT_NBR
GLBL_CAT_NBR

PTG120J02AA01

ProductSeries
ProductSeries

PTG

Nom de la catégorie
Nom de la catégorie

Cartouches à membrane plissée