Skip to main content

"Vi har registreret, at du besøger siden fra {0}. Vil du skifte sprog for at se indhold, der er tilpasset dig?"

3M™ NanoSHIELD™ Hollow Fiber Series Polypropylene Filter Cartridge

6 Tilgængelige produkter

Hold musen over billedet for at zoome

3M™ NanoSHIELD™ Hollow Fiber Series Polypropylene Filter Cartridge

Om produktet

3M™ NanoSHIELD™ Hollow Fibre Series filter cartridge is avail­able with membrane material of construction of polypropylene, polyethylene and nylon. 3M™ NanoSHIELD™ hollow fibre series filters have been engineered to com­bine a high level of particle retention with high flow rates and low pressure drop for the most demanding applica­tions in the latest technology node.

Produktmuligheder

1-5 af 6 Produkter

Vælg filtre for at indsnævre din produktliste

Produktnavn og ID'er 3M ID Generel længde (imperial) Generel længde (metrisk) Total Diameter (Imperial) Samlet diameter (metrisk standard) Produkttype Reduktionskrav Afslut ændring Produktform Filtertype Mikronklassificering (absolut) Applikation Filterteknologi Brancher Produktserie Mærke

3M ID

7100177182

Generel længde (imperial)

10 in

Generel længde (metrisk)

25.4 cm

Total Diameter (Imperial)

2.76 in

Samlet diameter (metrisk standard)

7 cm

Produkttype

Hulfibernanofiltrering

Reduktionskrav

5 nm to 100 nm

Afslut ændring

222 O-Ring & Flat Cap

Produktform

Patron

Filtertype

Hollow Fiber

Mikronklassificering (absolut)

0.01 absolute, @ 99.9%

Applikation

Kemikalier med høj renhed

Filterteknologi

Membran

Brancher

Industri og produktion,Mikroelektronik,Fremstilling af halvledere

Produktserie

Hollow Fiber

Mærke

NanoSHIELD™

3M ID

7100065039

Generel længde (imperial)

10 in

Generel længde (metrisk)

25.4 cm

Total Diameter (Imperial)

2.76 in

Samlet diameter (metrisk standard)

7 cm

Produkttype

Hulfibernanofiltrering

Reduktionskrav

5 nm to 100 nm

Afslut ændring

222 O-Ring & Flat Cap

Produktform

Patron

Filtertype

Hollow Fiber

Mikronklassificering (absolut)

0.02 absolute, @ 99.9%

Applikation

Kemikalier med høj renhed

Filterteknologi

Membran

Brancher

Industri og produktion,Mikroelektronik,Fremstilling af halvledere

Produktserie

Hollow Fiber

Mærke

NanoSHIELD™

3M ID

7010413619

Generel længde (imperial)

5 in

Generel længde (metrisk)

12.7 cm

Total Diameter (Imperial)

2.76 in

Samlet diameter (metrisk standard)

7 cm

Produkttype

Hulfibernanofiltrering

Reduktionskrav

5 nm to 100 nm

Afslut ændring

222 O-Ring & Flat Cap

Produktform

Patron

Filtertype

Hollow Fiber

Mikronklassificering (absolut)

0.01 absolute, @ 99.9%

Applikation

Kemikalier med høj renhed

Filterteknologi

Membran

Brancher

Industri og produktion,Mikroelektronik,Fremstilling af halvledere

Produktserie

Hollow Fiber

Mærke

NanoSHIELD™

3M ID

7010381454

Generel længde (imperial)

10 in

Generel længde (metrisk)

25.4 cm

Total Diameter (Imperial)

2.76 in

Samlet diameter (metrisk standard)

7 cm

Produkttype

Hulfibernanofiltrering

Reduktionskrav

5 nm to 100 nm

Afslut ændring

222 O-Ring & Flat Cap

Produktform

Patron

Filtertype

Hollow Fiber

Mikronklassificering (absolut)

0.005 absolute, @ 99.9%

Applikation

Kemikalier med høj renhed

Filterteknologi

Membran

Brancher

Industri og produktion,Mikroelektronik,Fremstilling af halvledere

Produktserie

Hollow Fiber

Mærke

NanoSHIELD™

3M ID

7010340161

Generel længde (imperial)

20 in

Generel længde (metrisk)

50.8 cm

Total Diameter (Imperial)

2.76 in

Samlet diameter (metrisk standard)

7 cm

Produkttype

Hulfibernanofiltrering

Reduktionskrav

5 nm to 100 nm

Afslut ændring

222 O-Ring & Flat Cap

Produktform

Patron

Filtertype

Hollow Fiber

Mikronklassificering (absolut)

0.005 absolute, @ 99.9%

Applikation

Kemikalier med høj renhed

Filterteknologi

Membran

Brancher

Industri og produktion,Mikroelektronik,Fremstilling af halvledere

Produktserie

Hollow Fiber

Mærke

NanoSHIELD™

3M ID

7010339924

Generel længde (imperial)

5 in

Generel længde (metrisk)

12.7 cm

Total Diameter (Imperial)

2.76 in

Samlet diameter (metrisk standard)

7 cm

Produkttype

Hulfibernanofiltrering

Reduktionskrav

5 nm to 100 nm

Afslut ændring

222 O-Ring & Flat Cap

Produktform

Patron

Filtertype

Hollow Fiber

Mikronklassificering (absolut)

0.02 absolute, @ 99.9%

Applikation

Kemikalier med høj renhed

Filterteknologi

Membran

Brancher

Industri og produktion,Mikroelektronik,Fremstilling af halvledere

Produktserie

Hollow Fiber

Mærke

NanoSHIELD™

Produktdetaljer

3M™ NanoSHIELD™ Hollow Fibre Series filters have been engineered to combine a high level of particle retention with high flow rates and low pressure drop for the most demanding applications in the latest technology node. All 3M™ NanoSHIELD™ hollow fibre series filters are critically cleaned and integrity tested to provide low extractable levels and process repeatability out of the box.

3M™ NanoSHIELD™ Hollow Fibre Series filter cartridges provide up to twice the surface area and higher flow rates when compared to pleated membrane cartridges. This increase to flow and decrease to pressure drop allows a typical 10" 3M™ NanoSHIELD™ Hollow Fibre Series filter cartridge to perform similarly to a 20" conventionally pleated filter cartridge. This significant advantage allows for the use of smaller and less costly filter housings which reduce hold-up volume, filter change-out times, and total cost-of-ownership for the life of the process. In addition, Hollow Fibre Technology offers a membrane that is up to 2 times thicker than flat sheet membranes typically used in the lithography industry which in turn maximizes the depth of filtration and particle removal efficiency.

3M™ NanoSHIELD™ Hollow Fibre Series Cartridge is available in polypropylene, polyethylene and nylon membranes. This provides low metallic/ionic contamination and excellent resistance to many chemicals. Metallic or ionic contaminants can extract from surface modified and improperly manufactured filters, which may reduce shelf life and or change the photo-speed, viscosity, or molecular weight of advanced chemicals. For this reason, all 3M™ NanoSHIELD Hollow Fibre Series filters are critically cleaned and integrity tested to provide low extractable levels and process repeatability out of the box.

The compact design of 3M™ NanoSHIELD™ Hollow Fibre Series filter cartridges make them ideally suited for critical applications requiring low hold-up volume with superior flow rates and high particle retention from 100 nm down to 5 nm.

  • 3M™ NanoSHIELD™ Hollow Fibre Technology offers a thicker membrane than flat sheet membrane, maximizing the depth of filtration for particle reduction efficiency.
  • Provides low operating and differential pressure across the filter to reduce outgassing and micro-bubble formation.
  • Available in Polypropylene, Polyethylene, and Nylon hollow fibre membrane, all with polyethylene cage and end caps.
  • Reduces hold-up volume and “dead space” by eliminating the filter core.
  • Reduces particles, gels, and micro-bubbles.
  • Available in 5nm to 100nm filtration ratings, in 5” to 20” cartridges (consult datasheet for availability).

Produktspecifikationer

Afslut ændring
Afslut ændring

222 O-Ring & Flat Cap

Generel længde (imperial)
Generel længde (imperial)

10 in, 5 in, 20 in

Category Name
Category Name

Foldede membranpatroner

Total Diameter (Imperial)
Total Diameter (Imperial)

2.76 in

Samlet diameter (metrisk standard)
Samlet diameter (metrisk standard)

7 cm

Filterteknologi
Filterteknologi

Membran

Mikronklassificering (absolut)
Mikronklassificering (absolut)

0.01 absolute, @ 99.9%, 0.005 absolute, @ 99.9%, 0.02 absolute, @ 99.9%

Reduktionskrav
Reduktionskrav

5 nm to 100 nm

Mærke
Mærke

NanoSHIELD™

Produkttype
Produkttype

Hulfibernanofiltrering

Brancher
Brancher

Industri og produktion,Mikroelektronik,Fremstilling af halvledere

Produktform
Produktform

Patron

Generel længde (metrisk)
Generel længde (metrisk)

25.4 cm, 12.7 cm, 50.8 cm

Applikation
Applikation

Kemikalier med høj renhed

Filtertype
Filtertype

Hollow Fiber

Produktserie
Produktserie

Hollow Fiber