Skip to main content

"We hebben gedetecteerd dat u onze site bezoekt vanuit {0}. Wilt u van taal wisselen voor inhoud op maat?"

3M™ Micro-Klean™ RP Series Filter Cartridge

Zweef over afbeelding om in te zoomen

3M™ Micro-Klean™ RP Series Filter Cartridge

Over het product

We manufacture Micro-Klean™ RP series filters with a rigid, graded porosity, all-polypropylene construction and an extrusion bonded technology. Benefits include increased surface areas for extended filter life along with high particle removal efficiency at high flow rates (flux).

Productopties

1- van Producten

Selecteer filters om uw productlijst te verfijnen

Productnaam Product-ID Totale lengte (imperiaal) Totale lengte (metrisch) Totale diameter (Brits) Totale diameter (metrisch) Micronage Sectoren Productserie Merk Categorienaam

Product-ID

7000104719

Totale lengte (imperiaal)

9.75 in

Totale lengte (metrisch)

24.765 cm

Totale diameter (Brits)

2.66 in

Totale diameter (metrisch)

6.756 cm

Micronage

25 μm

Sectoren

Industrieel water,Productie

Productserie

Micro-Klean™ RP Series

Merk

Micro-Klean™

Categorienaam

Cilindrische dieptefilterkaarsen

Product-ID

7000104700

Totale lengte (imperiaal)

29.25 in

Totale lengte (metrisch)

74.295 cm

Totale diameter (Brits)

2.66 in

Totale diameter (metrisch)

6.756 cm

Micronage

50 μm

Sectoren

Industrieel water,Productie

Productserie

Micro-Klean™ RP Series

Merk

Micro-Klean™

Categorienaam

Cilindrische dieptefilterkaarsen

Productdetails

Our rigid construction for the Micro-Klean™ RP series filter provides consistent performance, extended service life and fewer filter change-outs. Our manufacturing process provides a high degree of fibre-to-fibre thermal bonding, without the use of binders, to produce a rigid, core-less filter structure with the following properties:

  • Does not unload contaminants as differential pressure increases, as typical melt-blown filters may.
  • Grooves machined into the cartridge’s surface more than double the effective surface area, reducing premature blinding of the outer surface by large particles and gels.
  • Exhibits exceptionally low differential pressure for a given filter rating.
  • Continuous integral length filter element is easy to install and has no bond joints to break.

*Surfaces that are in contact with water are FDA CFR-21 compliant.

Micro-Klean™ RP series filters are suitable for a wide range of particle-control and equipment protection applications in the Food & Beverage and Pharmaceutical industries.

  • Longer service life, with fewer cartridge change-outs than non-rigid filters
  • Rigid construction helps protect against unloading of particles during service life
  • Grooved cartridge increases surface area for fuller utilization of the depth-matrix
  • Clean design, without adhesives, binders, surfactants, or lubricants
  • FDA CFR-21 Compliant Materials*

Productspecificaties

Categorienaam
Categorienaam

Cilindrische dieptefilterkaarsen

Sectoren
Sectoren

Industrieel water,Productie

Micronage
Micronage

50 μm, 25 μm

Totale lengte (metrisch)
Totale lengte (metrisch)

74.295 cm, 24.765 cm

Merk
Merk

Micro-Klean™

Totale diameter (Brits)
Totale diameter (Brits)

2.66 in

Productserie
Productserie

Micro-Klean™ RP Series

Totale diameter (metrisch)
Totale diameter (metrisch)

6.756 cm

Totale lengte (imperiaal)
Totale lengte (imperiaal)

29.25 in, 9.75 in

Vraag een expert