Skip to main content

"Vi har registreret, at du besøger siden fra {0}. Vil du skifte sprog for at se indhold, der er tilpasset dig?"

3M™ 740B Series Filter Cartridge 740B40PP040D1, 40 in, 40 um, Nitrile,1/Case

Hold musen over billedet for at zoome

Hold musen over billedet for at zoome

3M™ 740B Series Filter Cartridge 740B40PP040D1, 40 in, 40 um, Nitrile,1/Case
3M™ 740 Series Filters, General Industrial, Filter Media

Om produktet

3M™ 740 Series Filter Cartridges are our large diameter, polypropylene microfibre pleated depth media cartridges for use in filter housings that accept 16.51 cm outside diameter and 101.6 cm length filter cartridges with 226 o-ring connections.

  • Afslut ændring : 226
  • Generel længde (imperial) : 40 in
  • OverallDiameterMetric : 16.5 cm
  • Total Diameter (Imperial) : 6.5 in
  • Flowhastighed (metrisk) : 18 m³/hr
  • Grade : 740
  • Filterteknologi : Ikke-vævet
  • Mikronklassificering (absolut) : 40 absolute, @ 99.9%
  • OverallLengthMetric : 101.6 cm
  • FlowRateImperial : 79.26 gal/min
  • Produkttype : Plisseret ikke-vævet medium
  • Brancher : Kemisk fremstilling,Industrielt vand,Industri og produktion,Olie og gas
  • Produktform : Patron
  • Kategorinavn : Foldede membranpatroner
  • Filtertype : Surface
  • Produktserie : 740

Produktdetaljer

For high efficiency, outside to inside flow direction liquid filtration use 3M™ 740 Series Filter Cartridges. Designed for applications with high contaminant removal requirements our cartridges permit higher flow rates than standard 6.35 cm diameter products resulting in significantly fewer required filter cartridges for a given flow. 3M polypropylene microfibre forms the basis of the filtration media utilised in the 3M 740 Series Filter Cartridges. Our manufacturing processes allow for tightly controlled specifications resulting in a filter media with consistent and predictable particle retention characteristics. The microfibre media is pleated in a radial design (a 3M innovation) which optimises the usable surface area of the filter cartridges. 3M 740 Series Filter Cartridges utilise polypropylene end caps, outer sleeves and cores to protect the pleat structure integrity and provide a robust filter construction. A double o-ring seal design is incorporated to reduce the risk of fluid bypass. 3M 740 Series Filter Cartridges are offered in micron grades ranging from 1μm to 70 μm (at 99.9% particle removal efficiency).
  • Higher flow capacity per cartridge resulting in fewer cartridges required, reduced cartridge handling, and less individual cartridge seal points minimising chance of fluid bypass
  • Radial pleat design offers high contaminant capacity
  • Use of 3M microfibre filtration medias offers consistent and predictable filtration performance and high particle removal efficiencies throughout filter life
  • Easy to use with no special tools or hardware required for filter change-out
  • All polypropylene filter construction offers broad chemical compatibility

Foreslåede anvendelser

  • Use for process waters (pre-RO, cooling), machine coolants, chemicals, refining, ground/reclaimed/waste waters, well injection and produced waters

Produktspecifikationer

Afslut ændring
Afslut ændring

226

Generel længde (imperial)
Generel længde (imperial)

40 in

OverallDiameterMetric
OverallDiameterMetric

16.5 cm

Total Diameter (Imperial)
Total Diameter (Imperial)

6.5 in

Flowhastighed (metrisk)
Flowhastighed (metrisk)

18 m³/hr

Grade
Grade

740

Filterteknologi
Filterteknologi

Ikke-vævet

Mikronklassificering (absolut)
Mikronklassificering (absolut)

40 absolute, @ 99.9%

OverallLengthMetric
OverallLengthMetric

101.6 cm

FlowRateImperial
FlowRateImperial

79.26 gal/min

Produkttype
Produkttype

Plisseret ikke-vævet medium

Brancher
Brancher

Kemisk fremstilling,Industrielt vand,Industri og produktion,Olie og gas

Produktform
Produktform

Patron

Kategorinavn
Kategorinavn

Foldede membranpatroner

Filtertype
Filtertype

Surface

Produktserie
Produktserie

740