Skip to main content

Vi har registreret, at du besøger siden fra USA. Vil du skifte sprog for at se indhold, der er tilpasset dig?

  1. 3M™ LifeASSURE™ BDA Series Filter Cartridge

3M™ LifeASSURE™ BDA Series Filter Cartridge, BDA020F02BA, 20 in, 0.2 um,226/Spear, Silicone, 6/Case

undefined

Hold musen over billedet for at zoome

3M™ LifeASSURE™ BDA Series Filter Cartridge, BDA020F02BA, 20 in, 0.2 um,226/Spear, Silicone, 6/Case

Om produktet

We designed the 3M™ LifeASSURE™ BDA Series Filter Cartridge to help bottled water and other beverage processors meet the highest standards for microorganism control. Combined with the 3M range of particle control and prefiltration filter cartridges, these cartridges offer bottlers a solution for rigorous contaminant control while maintaining long service life and low operating costs.

Detaljer

  • Afslut ændring : 226 O-ring & Spear
  • Generel længde (imperial) : 20 in
  • OverallDiameterMetric : 7 cm
  • Total Diameter (Imperial) : 2.76 in
  • Filterteknologi : Membran
  • Kornstørrelse : BDA020
  • categoryName : Foldede membranpatroner
  • Mikronklassificering (absolut) : 0.2 absolute, @ 99.9%
  • Produkttype : Plisseret membran
  • Brancher : Bryggerier,Føde- og drikkevareproduktion,Industri og produktion,Fremstilling af sodavand,Vingårde
  • Produktform : Patron
  • Generel længde (metrisk) : 50.8 cm
  • Trademark2 : LifeASSURE™
  • Filtertype : Surface
  • Produktserie : BDA

Produktdetaljer

We designed the 3M™ LifeASSURE™ BDA Series Filter Cartridge to help bottled water and other beverage processors meet the highest standards for microorganism control. Combined with the 3M range of particle control and prefiltration filter cartridges, these cartridges offer bottlers a solution for rigorous contaminant control while maintaining long service life and low operating costs.

Durable Design

The 3M™ LifeASSURE™ BDA Series filter membrane and cartridge design innovations result in a highly durable filter cartridge, capable of secure operation through numerous cycles of hot water sanitation, steam sterilization, and chemical based cleaning and sanitation.

Highly Asymmetric BDA Membrane

3M™ LifeASSURE™ BDA Series filters incorporate a novel dual-layer membrane with a high degree of asymmetry. When viewed in cross-section, the membrane contains larger pores on the upstream surface that gradually taper to smaller pores towards the downstream surface. Compared with conventional membranes with a symmetric pore structure, this structure provides greater contaminant capacity, since it presents greater open spaces (void volume) in which to retain these contaminants. This increase in capacity leads directly to longer service life. In addition, the asymmetric structure provides less resistance to flow, resulting in a lower pressure drop when compared at a constant flow rate to competitive filters, allowing a user to employ fewer 3M™ LifeASSURE™ BDA series filters for any given flow rate.

Advanced Pleat Technology Design

3M™ LifeASSURE™ BDA Series filters feature Advanced Pleat Technology (APT) design for extended service life. This design technology helps to maximize the useful surface area of the filter while maintaining open flow paths between the media pleats. By employing the APT design, the 3M™ LifeASSURE BDA Series filter provides lower pressure drops, longer service life, and lower overall operational costs.

Novel Media Support Design

3M™ LifeASSURE™ BDA Series filter cartridges employ a design that results in higher beverage flow versus pressure drop compared with competitive filters. This 3M Purification development combines the high flowing 3M™ LifeASSURE™ BDA series filter membrane with special support layers upstream and downstream of the membrane. When combined with the previously mentioned APT, this feature greatly increases flow per cartridge, and results in lower overall operational costs.

  • Multi-zone, microporous Nylon 6,6 membrane filtration, available in 0.2 to 0.8 micron range for protection of final membrane filter cartridges
  • Asymmetric dual-layer polyether sulfone membrane provides exceptionally high capacity and service life to help maximize economy
  • 100% Integrity tested in manufacturing and in situ for proper installation and operation
  • All materials are CFR 21 listed and are compliant with Regulation (EC) 1935/2004 to ease regulatory concerns

Produktspecifikationer

Afslut ændring
Afslut ændring

226 O-ring & Spear

Generel længde (imperial)
Generel længde (imperial)

20 in

OverallDiameterMetric
OverallDiameterMetric

7 cm

Total Diameter (Imperial)
Total Diameter (Imperial)

2.76 in

Filterteknologi
Filterteknologi

Membran

Kornstørrelse
Kornstørrelse

BDA020

categoryName
categoryName

Foldede membranpatroner

Mikronklassificering (absolut)
Mikronklassificering (absolut)

0.2 absolute, @ 99.9%

Produkttype
Produkttype

Plisseret membran

Brancher
Brancher

Bryggerier,Føde- og drikkevareproduktion,Industri og produktion,Fremstilling af sodavand,Vingårde

Produktform
Produktform

Patron

Generel længde (metrisk)
Generel længde (metrisk)

50.8 cm

Trademark2
Trademark2

LifeASSURE™

Filtertype
Filtertype

Surface

Produktserie
Produktserie

BDA