3M™ NanoSHIELD™ Hollow Fiber Series Filter Cartridge, NSP001H01FK, 10in, 0.01 um, 222/Flat Cap, FEP, 1/Case
La division Purification et Filtration de Solventum fait désormais partie de Thermo Fisher Scientific. Le segment pour la Filtration de l'Eau Potable reste sous la responsabilité de Solventum. Pour plus d'informations, cliquez ici.
À propos du produit
3M™ NanoSHIELD™ Hollow Fibre Series filter cartridge is available with membrane material of construction of polypropylene, polyethylene and nylon. 3M™ NanoSHIELD™ hollow fibre series filters have been engineered to combine a high level of particle retention with high flow rates and low pressure drop for the most demanding applications in the latest technology node.
Détails du produit
3M™ NanoSHIELD™ Hollow Fibre Series filters have been engineered to combine a high level of particle retention with high flow rates and low pressure drop for the most demanding applications in the latest technology node. All 3M™ NanoSHIELD™ hollow fibre series filters are critically cleaned and integrity tested to provide low extractable levels and process repeatability out of the box.
3M™ NanoSHIELD™ Hollow Fibre Series filter cartridges provide up to twice the surface area and higher flow rates when compared to pleated membrane cartridges. This increase to flow and decrease to pressure drop allows a typical 10" 3M™ NanoSHIELD™ Hollow Fibre Series filter cartridge to perform similarly to a 20" conventionally pleated filter cartridge. This significant advantage allows for the use of smaller and less costly filter housings which reduce hold-up volume, filter change-out times, and total cost-of-ownership for the life of the process. In addition, Hollow Fibre Technology offers a membrane that is up to 2 times thicker than flat sheet membranes typically used in the lithography industry which in turn maximizes the depth of filtration and particle removal efficiency.
3M™ NanoSHIELD™ Hollow Fibre Series Cartridge is available in polypropylene, polyethylene and nylon membranes. This provides low metallic/ionic contamination and excellent resistance to many chemicals. Metallic or ionic contaminants can extract from surface modified and improperly manufactured filters, which may reduce shelf life and or change the photo-speed, viscosity, or molecular weight of advanced chemicals. For this reason, all 3M™ NanoSHIELD Hollow Fibre Series filters are critically cleaned and integrity tested to provide low extractable levels and process repeatability out of the box.
The compact design of 3M™ NanoSHIELD™ Hollow Fibre Series filter cartridges make them ideally suited for critical applications requiring low hold-up volume with superior flow rates and high particle retention from 100 nm down to 5 nm.
- 3M™ NanoSHIELD™ Hollow Fibre Technology offers a thicker membrane than flat sheet membrane, maximizing the depth of filtration for particle reduction efficiency.
- Provides low operating and differential pressure across the filter to reduce outgassing and micro-bubble formation.
- Available in Polypropylene, Polyethylene, and Nylon hollow fibre membrane, all with polyethylene cage and end caps.
- Reduces hold-up volume and “dead space” by eliminating the filter core.
- Reduces particles, gels, and micro-bubbles.
- Available in 5nm to 100nm filtration ratings, in 5” to 20” cartridges (consult datasheet for availability).
Spécifications du produit
| Type de filtre |
Type de filtre
Hollow Fiber |
| Seuil en microns (absolu) |
Seuil en microns (absolu)
0.01 absolute, @ 99.9% |
| Type de produit |
Type de produit
Nano-filtration à fibres creuses |
| Diamètre total (en pouces) |
Diamètre total (en pouces)
2.76 in |
| Forme de produit |
Forme de produit
Cartouche |
| Secteurs |
Secteurs
Fabrication,Microélectronique,Fabrication de semi-conducteurs |
| Technologie du filtre |
Technologie du filtre
Membrane |
| Longueur totale (métrique) |
Longueur totale (métrique)
25.4 cm |
| Marque |
Marque
NanoSHIELD™ |
| Série du produit |
Série du produit
Hollow Fiber |
| Utilisation |
Utilisation
Produits chimiques de grande pureté |
| Diamètre global (métrique) |
Diamètre global (métrique)
7 cm |
| Réclamation de réduction |
Réclamation de réduction
5 nm to 100 nm |
| Longueur totale (impérial) |
Longueur totale (impérial)
10 in |
| Modification finale |
Modification finale
222 O-Ring & Flat Cap |
| Nom de la catégorie |
Nom de la catégorie
Cartouches à membrane plissée |