3M™ CUNO™ CTG-Klean System Filter Pack with Betafine™ XL Series Filter Cartridge
Informazioni sul prodotto
CUNO™ CTG-Klean System Filter Pack with Betafine™ XL Series Filter Cartridge was designed as part of a totally enclosed system that uses a separate pressure vessel and disposable filter pack to isolate the product being filtered from the housing. It reduces time, labour and operator exposure to impurities and cleaning solvents involved with filter change-outs and cleaning of conventional housings.
| Nome del prodotto e ID | ID 3M | Lunghezza complessiva (misure imperiali) | Lunghezza complessiva (misure metriche) | Diametro (unità misura Imperiale anglosassone) | Diametro complessivo (misure metriche) | Tipo di prodotto | Stato del prodotto | Tipo di filtro | Grana | Classificazione Micron (assoluta) | FilterTechnology | Settori | Serie prodotto | Marchio |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
7100151145 | 30 in | 76.2 cm | 6.63 in | 16.83 cm | Configurazione della cartuccia in un sacchetto a dispersione statica doppia | CTG-Klean | Surface | XL | 5 absolute, @ 99.9% | CTG-Klean | Produzione,Microelettronica | Betafine™ XL Series | CUNO™ |
|
|
7000102991 | 10 in | 25.4 cm | 3.5 in | 8.9 cm | Configurazione della cartuccia in un sacchetto a dispersione statica doppia | CTG-Klean | Surface | XL | 0.2 absolute, @ 99.9% | CTG-Klean | Produzione,Microelettronica | Betafine™ XL Series | CUNO™ |
|
7000102403 | 30 in | 76.2 cm | 8.87 in | 22.54 cm | Configurazione della cartuccia in un sacchetto a dispersione statica doppia | CTG-Klean | Surface | XL | 0.2 absolute, @ 99.9% | CTG-Klean | Produzione,Microelettronica | Betafine™ XL Series | CUNO™ |
|
|
7000101848 | 30 in | 76.2 cm | 6.63 in | 16.83 cm | Configurazione della cartuccia in un sacchetto a dispersione statica doppia | CTG-Klean | Surface | XL | 0.2 absolute, @ 99.9% | CTG-Klean | Produzione,Microelettronica | Betafine™ XL Series | CUNO™ |
Dettagli del prodotto
The 3M™ Betafine™ XL Series Filter Difference
3M™ Betafine™ XL Series filter cartridge’s all-polypropylene cartridge components are thermally bonded; no adhesives or binder compounds are used. All materials used in the manufacture of 3M™ Betafine™ XL filters are CFR 21 listed for direct food contact. 3M™ Betafine™ XL Series filter cartridges are ideal for a wide variety of applications.
High surface area of the pleated filter matrix offers increased flow, high contaminant loading capacity and low initial pressure drop. 3M™ Betafine™ XL Series filter construction is optimized to obtain high flow rates while maintaining the defined particle reduction efficiencies. Each filter cartridge is manufactured from 100% polypropylene and pleated for increased surface area.
The Power of Pleated Performance
Our engineered, absolute rated, pleated filter provides dependable, repeatable filtration, improving effluent quality and helping provide consistent performance. The nature of pleated media also constitutes a greater surface area in less physical space and provides a longer service life compared to non-pleated media. Greater surface area leads to fewer filter change-outs and lower total filtration operating costs.
Streamlined, Long-Life, High-Performance
Our cartridge pack design reduces the extensive time and labour involved with filter change-outs and cleaning of conventional housings, thereby reducing operator exposure to product cleaning solvents. This streamlined system, coupled with high performance, long-life filters, make CUNO™ CTG-Klean Systems the clear choice for cost-effective filtration. In some applications, hold up volume can be recovered from the system and used filter packs can be capped and stored for repeated use, lowering costs.
- Cartridge pack design reduces the time and labour involved with filter change-outs and cleaning of conventional housings
- Totally enclosed filter pack avoids handling of used filter cartridges
- Design reduces gaskets, posts, spring and seal assemblies, and seal plates for efficient and time saving filter installation and removal
- Filter pack can be capped and reused, depending on the application
- Rapid filter change-out reduces labour time.
- 3M™ Betafine™ XL filters, constructed of 100% polypropylene, provide excellent chemical and thermal compatibility.
- FDA CFR-21 Compliant Material.
Specifiche del prodotto
| Lunghezza complessiva (misure imperiali) |
Lunghezza complessiva (misure imperiali)
30 in, 10 in |
| Stato del prodotto |
Stato del prodotto
CTG-Klean |
| Settori |
Settori
Produzione,Microelettronica |
| OverallDiameterMetric |
OverallDiameterMetric
16.83 cm |
| OverallLengthImperial |
OverallLengthImperial
30 in |
| Nome categoria |
Nome categoria
Cartucce a membrana pieghettate |
| ProductType |
ProductType
Configurazione della cartuccia in un sacchetto a dispersione statica doppia |
| Serie prodotto |
Serie prodotto
Betafine™ XL Series |
| OverallDiameterImperial |
OverallDiameterImperial
6.63 in |
| Grade |
Grade
XL |
| Diametro (unità misura Imperiale anglosassone) |
Diametro (unità misura Imperiale anglosassone)
8.87 in, 6.63 in, 3.5 in |
| Tipo di filtro |
Tipo di filtro
Surface |
| Tipo di prodotto |
Tipo di prodotto
Configurazione della cartuccia in un sacchetto a dispersione statica doppia |
| FilterType |
FilterType
Surface |
| Classificazione Micron (assoluta) |
Classificazione Micron (assoluta)
0.2 absolute, @ 99.9%, 5 absolute, @ 99.9% |
| Marchio |
Marchio
CUNO™ |
| Grana |
Grana
XL |
| Lunghezza complessiva (misure metriche) |
Lunghezza complessiva (misure metriche)
76.2 cm, 25.4 cm |
| Tecnologia di filtraggio |
Tecnologia di filtraggio
CTG-Klean |
| ProductSeries |
ProductSeries
Betafine™ XL Series |
| FilterTechnology |
FilterTechnology
CTG-Klean |
| Diametro complessivo (misure metriche) |
Diametro complessivo (misure metriche)
22.54 cm, 16.83 cm, 8.9 cm |