Skip to main content

"We've detected that you're visiting from {0}. Would you like to switch languages for tailored content?"

->

3M™ High Flow Series Hsg, 1HF40BAAACC, 4in ANSI flange In/Out, 316SS, 150psi@250°F, EPDM, ASME Code Stamp

Solventum’s Purification and Filtration Business is now a part of Thermo Fisher Scientific. Drinking Water Filtration remains with Solventum. For more information, please visit here.

Hover over image to zoom

3M™ High Flow Series Hsg, 1HF40BAAACC, 4in ANSI flange In/Out, 316SS, 150psi@250°F, EPDM, ASME Code Stamp

About the product

3M™ High Flow Series Filter Housings are specifically designed to deliver all of the filtration benefits in a compact footprint. These housings are available in standard designs, as well as customizable configurations to suit your specific needs. All standard 3M high flow series filter housings are designed, manufactured, tested, and code stamped in accordance with ASME Section VIII, Division 1.

Details

View other product options
  • Filter Type : Filter Housing
  • Product Series : High Flow
  • Category name : Filter Housings

Product details

Pressure Equipment Directive 2014/68/EU: 3M High Flow housings are fully compliant with and built to PED 2014/68/EU Article 4.3 “Sound Engineering Practice” as standard. ATEX Directive 2014/34/EU The 3M High Flow Coreline housings are ATEX approved as standard for use in ATEX condition II 2 GD c IIC/IIIC. Marking and documentation The housings are clearly marked and delivered with a EN10204 Certificate of Conformity 2.2. The user of these housings must ensure that they are used in compliance with the requirements of these PED and ATEX directives at all times, and in accordance with the instruction manual supplied. Food Contact Directive (EC) 1935/2004 The housings are constructed from 316 and 316L stainless steel (wetted parts in contact) and delivered with O-rings that are compliant to FDA (there are no other non-316 parts in contact). Design In addition to the standard Coreline housing range described here, 3M High Flow System Housings can be built upon request to a wide range of specifications and design and construction standards. These routinely include PED Category IV and for use with Hazardous (Group 1) liquids and Gas/Vapour. Design and constructions codes can include (but are not limited to) EN13445, AD Merkblatter, ASME Div VIII & U Stamp and CODAP. Materials can include in addition to 316 (but not limited to) 304 and Uranus B6 Super Duplex steels
•3M High Flow Series Filter Housings are 33% to 50% smaller than competitively sized housings for a given flow rate
•Single Cartridge Housings available for 10 in, 40 in and 60 in High Flow Cartridges
•Robust cartridge centre-post design - Eliminates bulky support plates providing easy access to housing internals
•Hinged cover for easy filter cartridge change-outs.
•ASME Code design meets high quality and performance standards.

Product specifications

Filter Type
Filter Type

Filter Housing

Product Series
Product Series

High Flow

Category name
Category name

Filter Housings

Ask an expert

*All fields are required unless indicated optional

 

Solventum will use the information to respond to your request in accordance with our Privacy Policy.