Zum Hauptinhalt wechseln

"Wir haben festgestellt, dass Sie unsere Seite aus {0} aufrufen. Möchten Sie die Sprache wechseln, um angepasste Inhalte zu erhalten?"

->

3M™ Betafine™ PTG Series Filter Capsule, PTG120J02AA01, 20 in, 1.2 µ, Sanitary, 1/Case

Der Geschäftsbereich Aufreinigung und Filtration von Solventum gehört nun zu Thermo Fisher Scientific. Der Geschäftsbereich Trinkwasserfiltration verbleibt bei Solventum. Weitere Informationen finden Sie hier.

Zum Vergrößern mit der Maus über das Bild fahren

Zum Vergrößern mit der Maus über das Bild fahren

3M™ Betafine™ PTG Series Filter Capsule, PTG120J02AA01, 20 in, 1.2 µ, Sanitary, 1/Case
Betafine(TM) Series, low res photo

Über das Produkt

This absolute-rated, graded-porosity 100% polypropylene pleated filter features Advanced Pleat Technology (APT) that increases the usable filtration surface area while maintaining standard filter dimensions.

Details

  • Gesamtlänge (metrisch) : 50.8 cm
  • Marke : Betafine™
  • OverallLengthImperial : 20 in
  • μm-Angabe (absolut) : 1.2 absolute, @ 99.9%
  • OverallWidthImperial : 3 in
  • Filtertyp : Surface
  • ProductSeries : PTG
  • OverallWidthMetric : 7.62 cm
  • Produkttyp : Filterkapsel
  • FilterTechnology : Vlies
  • EndModification : Sanitary Fitting
  • categoryName : Plissierte Membranfilterpatronen

Produktdetails

The service life of a pleated filter is often dictated by the accessible surface area. Conventional pleated filters may offer a large gross surface area, but when the media is packed too tightly into the cartridge, only part of the surface area is usable resulting in both flow restrictions and limited contaminant holding capacity. The "blind" or unusable area commonly occurs near the inside diameter where the pleats are packed most tightly. The Betafine PPG and PTG series filter is manufactured using a staggered pleat configuration that, when combined with a novel support material, provides more open space between the pleats. The APT staggered pleats with increased open area allow for greater contaminant loading between pleats at the inside diameter, while the reduced length pleats take advantage of existing open space closer to the filters outside diameter. The result is a fully used surface area that provides superior service life.
  • Advanced Pleat Technology Construction for High Surface Area as compared to competitive filters: higher product throughputs for prolonged service life, lower total filtration operating costs, and lower pressure drops for higher flow rates.
  • Absolute-rated Filter Performance. Higher product quality and yields.
  • Graded-porosity Multi-layer Filter Media. Capture of contaminant throughout the filter media to help maximize filter life. Higher contaminant holding capacity.
  • Polypropylene Construction Free of Adhesives and Surfactants. Very low extractable levels for optimum filtrate purity. Broad chemical compatibility for most aggressive process applications.
  • 100% Integrity Tested Versions Available. Prequalification and consistency in critical applications. Suitable for final filtration in many applications.

Produktspezifikationen

Gesamtlänge (metrisch)
Gesamtlänge (metrisch)

50.8 cm

Marke
Marke

Betafine™

OverallLengthImperial
OverallLengthImperial

20 in

μm-Angabe (absolut)
μm-Angabe (absolut)

1.2 absolute, @ 99.9%

OverallWidthImperial
OverallWidthImperial

3 in

Filtertyp
Filtertyp

Surface

ProductSeries
ProductSeries

PTG

OverallWidthMetric
OverallWidthMetric

7.62 cm

Produkttyp
Produkttyp

Filterkapsel

FilterTechnology
FilterTechnology

Vlies

EndModification
EndModification

Sanitary Fitting

categoryName
categoryName

Plissierte Membranfilterpatronen