3M™ Betafine™ PTG Series Filter Cartridge

"Wir haben festgestellt, dass Sie unsere Seite aus {0} aufrufen. Möchten Sie die Sprache wechseln, um angepasste Inhalte zu erhalten?"

Zum Vergrößern mit der Maus über das Bild fahren

3M™ Betafine™ PTG Series Filter Cartridge

Über das Produkt

This absolute-rated, graded-porosity 100% polypropylene pleated filter features Advanced Pleat Technology (APT) that increases the usable filtration surface area while maintaining standard filter dimensions.

Produktoptionen

1- von Produkten

Wählen Sie Filter, um Ihre Produktliste einzugrenzen

Produktname	Produkt-ID	Gesamtbreite (imperial)	OverallWidthMetric	OverallLengthImperial	OverallLengthMetric	Produkttyp	Ausführung	Filtertyp	MicronRatingAbsolute	Filtertechnologie	Produktserien	Marke	Kategoriename
3M™ Betafine™ PTG Series Filter Capsule, PTG120J02AA01, 20 in, 1.2 µ, Sanitary, 1/Case	Produkt-ID 7000051413	Gesamtbreite (imperial) 3 in	OverallWidthMetric 7.62 cm	OverallLengthImperial 20 in	OverallLengthMetric 50.8 cm	Produkttyp Filterkapsel	Ausführung Sanitary Fitting	Filtertyp Surface	MicronRatingAbsolute 1.2 absolute, @ 99.9%	Filtertechnologie Vlies	Produktserien PTG	Marke Betafine™	Kategoriename Plissierte Membranfilterpatronen

Produktdetails

The service life of a pleated filter is often dictated by the accessible surface area. Conventional pleated filters may offer a large gross surface area, but when the media is packed too tightly into the cartridge, only part of the surface area is usable resulting in both flow restrictions and limited contaminant holding capacity. The "blind" or unusable area commonly occurs near the inside diameter where the pleats are packed most tightly. The Betafine PPG and PTG series filter is manufactured using a staggered pleat configuration that, when combined with a novel support material, provides more open space between the pleats. The APT staggered pleats with increased open area allow for greater contaminant loading between pleats at the inside diameter, while the reduced length pleats take advantage of existing open space closer to the filters outside diameter. The result is a fully used surface area that provides superior service life.

Advanced Pleat Technology Construction for High Surface Area as compared to competitive filters: higher product throughputs for prolonged service life, lower total filtration operating costs, and lower pressure drops for higher flow rates.
Absolute-rated Filter Performance. Higher product quality and yields.
Graded-porosity Multi-layer Filter Media. Capture of contaminant throughout the filter media to help maximize filter life. Higher contaminant holding capacity.
Polypropylene Construction Free of Adhesives and Surfactants. Very low extractable levels for optimum filtrate purity. Broad chemical compatibility for most aggressive process applications.
100% Integrity Tested Versions Available. Prequalification and consistency in critical applications. Suitable for final filtration in many applications.

Produktspezifikationen

Kategoriename	Kategoriename Plissierte Membranfilterpatronen
Gesamtlänge (imperial)	Gesamtlänge (imperial) 20 in
OverallWidthMetric	OverallWidthMetric 7.62 cm
MicronRatingAbsolute	MicronRatingAbsolute 1.2 absolute, @ 99.9%
Ausführung	Ausführung Sanitary Fitting
categoryName	categoryName Plissierte Membranfilterpatronen
FilterType	FilterType Surface
OverallLengthMetric	OverallLengthMetric 50.8 cm
Marke	Marke Betafine™
Gesamtbreite (imperial)	Gesamtbreite (imperial) 3 in
ProductSeries	ProductSeries PTG
Produkttyp	Produkttyp Filterkapsel
FilterTechnology	FilterTechnology Vlies

3M™ Betafine™ PTG Series Filter Cartridge

Produktdetails

Produktspezifikationen

Suchen Sie nach mehr?

Gebrauchsanweisungen

Sicherheitsdatenblätter

Kundenbetreuung und Support

Unsere Mission

Das Unternehmen

Ressourcen & Bildung

Info

Folgen Sie uns