Skip to main content

Vi har upptäckt att du besöker från USA. Vill du byta språk för att se anpassat innehåll?

->

3M™ 740 Series Filter Cartridge

6 Tillgängliga produkter

undefined

Håll muspekaren över bilden för att zooma

3M™ 740 Series Filter Cartridge

Om produkten

3M™ 740 Series Filter Cartridges are our large diameter, polypropylene microfibre pleated depth media cartridges for use in filter housings that accept 16.51 cm outside diameter and 101.6 cm length filter cartridges with 226 o-ring connections.

Produktalternativ

1-5 av 6 Produkter

Välj filter för att begränsa din produktlista

Produktdetaljer

For high efficiency, outside to inside flow direction liquid filtration use 3M™ 740 Series Filter Cartridges. Designed for applications with high contaminant removal requirements our cartridges permit higher flow rates than standard 6.35 cm diameter products resulting in significantly fewer required filter cartridges for a given flow. 3M polypropylene microfibre forms the basis of the filtration media utilised in the 3M 740 Series Filter Cartridges. Our manufacturing processes allow for tightly controlled specifications resulting in a filter media with consistent and predictable particle retention characteristics. The microfibre media is pleated in a radial design (a 3M innovation) which optimises the usable surface area of the filter cartridges. 3M 740 Series Filter Cartridges utilise polypropylene end caps, outer sleeves and cores to protect the pleat structure integrity and provide a robust filter construction. A double o-ring seal design is incorporated to reduce the risk of fluid bypass. 3M 740 Series Filter Cartridges are offered in micron grades ranging from 1μm to 70 μm (at 99.9% particle removal efficiency).
  • Higher flow capacity per cartridge resulting in fewer cartridges required, reduced cartridge handling, and less individual cartridge seal points minimising chance of fluid bypass
  • Radial pleat design offers high contaminant capacity
  • Use of 3M microfibre filtration medias offers consistent and predictable filtration performance and high particle removal efficiencies throughout filter life
  • Easy to use with no special tools or hardware required for filter change-out
  • All polypropylene filter construction offers broad chemical compatibility

Föreslagna användningsområden

  • Use for process waters (pre-RO, cooling), machine coolants, chemicals, refining, ground/reclaimed/waste waters, well injection and produced waters

Produktspecifikationer

Filterteknik
Filterteknik

Non-woven

Slutmodifiering
Slutmodifiering

226

OverallLengthImperial
OverallLengthImperial

40 in

Total diameter (metrisk)
Total diameter (metrisk)

16.5 cm

ProductType
ProductType

Veckat non-woven-material

ProductForm
ProductForm

Patron

OverallDiameterImperial
OverallDiameterImperial

6.5 in

EndModification
EndModification

226

categoryName
categoryName

Veckade membranfilterpatroner

Kornstorlek
Kornstorlek

740

Flödestakt (metrisk)
Flödestakt (metrisk)

18 m³/hr, 14 m³/hr

Kategorinamn
Kategorinamn

Veckade membranfilterpatroner

Flödestakt (imperial)
Flödestakt (imperial)

79.26 gal/min, 61.647 gal/min

FlowRateImperial
FlowRateImperial

79.26 gal/min

Branscher
Branscher

Kemisk tillverkning,Industriellt vatten,Tillverkningsindustrin,Olja och gas

Övergripande Diameter (Imperial)
Övergripande Diameter (Imperial)

6.5 in

Filtertyp
Filtertyp

Surface

Totallängd (metrisk)
Totallängd (metrisk)

101.6 cm

Produkttyp
Produkttyp

Veckat non-woven-material

Produktform
Produktform

Patron

Produktserie
Produktserie

740

FilterTechnology
FilterTechnology

Non-woven

Totallängd (imperial)
Totallängd (imperial)

40 in

Mikronklassning (absolut)
Mikronklassning (absolut)

25 absolute, @ 99.9%, 40 absolute, @ 99.9%, 10 absolute, @ 99.9%, 15 absolute, @ 99.9%, 2 absolute, @ 99.9%

Fråga en expert

*Alla fält är obligatoriska om inte annat anges som valfritt

 

Solventum kommer att använda informationen för att svara på din förfrågan och i enlighet med vår Integritetspolicy