Skip to main content

"Vi har oppdaget at du besøker fra {0}. Vil du bytte språk for å se innhold tilpasset deg?"

3M™ 740B Series Filter Cartridge 740B40PP040D1, 40 in, 40 um, Nitrile,1/Case

Hold over bildet for å zoome

Hold over bildet for å zoome

3M™ 740B Series Filter Cartridge 740B40PP040D1, 40 in, 40 um, Nitrile,1/Case
3M™ 740 Series Filters, General Industrial, Filter Media

Om produktet

3M™ 740 Series Filter Cartridges are our large diameter, polypropylene microfibre pleated depth media cartridges for use in filter housings that accept 16.51 cm outside diameter and 101.6 cm length filter cartridges with 226 o-ring connections.

  • Mikronvurdering (absolutt) : 40 absolute, @ 99.9%
  • Total lengde (Metrisk) : 101.6 cm
  • Avslutt endring : 226
  • ProductType : Foldet ikke-vevd media
  • Flowfrekvens (Imperial) : 79.26 gal/min
  • Total lengde (Imperial) : 40 in
  • Grade : 740
  • Flowfrekvens (Metrisk) : 18 m³/hr
  • Hel diameter (Metrisk) : 16.5 cm
  • Global Catalog Number : 740B40PP040D1
  • FilterType : Surface
  • ProductSeries : 740
  • Produktform : Patron
  • Total diameter (Imperial) : 6.5 in
  • Kategorinavn : Pleated Membrane Cartridges
  • FilterTechnology : Ikke-vevd
  • Bransjer : Kjemisk produksjon,Industrielt vann,Produksjon,Olje og gass

Produktdetaljer

For high efficiency, outside to inside flow direction liquid filtration use 3M™ 740 Series Filter Cartridges. Designed for applications with high contaminant removal requirements our cartridges permit higher flow rates than standard 6.35 cm diameter products resulting in significantly fewer required filter cartridges for a given flow. 3M polypropylene microfibre forms the basis of the filtration media utilised in the 3M 740 Series Filter Cartridges. Our manufacturing processes allow for tightly controlled specifications resulting in a filter media with consistent and predictable particle retention characteristics. The microfibre media is pleated in a radial design (a 3M innovation) which optimises the usable surface area of the filter cartridges. 3M 740 Series Filter Cartridges utilise polypropylene end caps, outer sleeves and cores to protect the pleat structure integrity and provide a robust filter construction. A double o-ring seal design is incorporated to reduce the risk of fluid bypass. 3M 740 Series Filter Cartridges are offered in micron grades ranging from 1μm to 70 μm (at 99.9% particle removal efficiency).
  • Higher flow capacity per cartridge resulting in fewer cartridges required, reduced cartridge handling, and less individual cartridge seal points minimising chance of fluid bypass
  • Radial pleat design offers high contaminant capacity
  • Use of 3M microfibre filtration medias offers consistent and predictable filtration performance and high particle removal efficiencies throughout filter life
  • Easy to use with no special tools or hardware required for filter change-out
  • All polypropylene filter construction offers broad chemical compatibility

Foreslåtte applikasjoner

  • Use for process waters (pre-RO, cooling), machine coolants, chemicals, refining, ground/reclaimed/waste waters, well injection and produced waters

Produktspesifikasjoner

Mikronvurdering (absolutt)
Mikronvurdering (absolutt)

40 absolute, @ 99.9%

Total lengde (Metrisk)
Total lengde (Metrisk)

101.6 cm

Avslutt endring
Avslutt endring

226

ProductType
ProductType

Foldet ikke-vevd media

Flowfrekvens (Imperial)
Flowfrekvens (Imperial)

79.26 gal/min

Total lengde (Imperial)
Total lengde (Imperial)

40 in

Grade
Grade

740

Flowfrekvens (Metrisk)
Flowfrekvens (Metrisk)

18 m³/hr

Hel diameter (Metrisk)
Hel diameter (Metrisk)

16.5 cm

Global Catalog Number
Global Catalog Number

740B40PP040D1

FilterType
FilterType

Surface

ProductSeries
ProductSeries

740

Produktform
Produktform

Patron

Total diameter (Imperial)
Total diameter (Imperial)

6.5 in

Kategorinavn
Kategorinavn

Pleated Membrane Cartridges

FilterTechnology
FilterTechnology

Ikke-vevd

Bransjer
Bransjer

Kjemisk produksjon,Industrielt vann,Produksjon,Olje og gass