Skip to main content

"We hebben gedetecteerd dat u onze site bezoekt vanuit {0}. Wilt u van taal wisselen voor inhoud op maat?"

3M™ Micro-Klean™ RP Series Filter Cartridge

Zweef over afbeelding om in te zoomen

3M™ Micro-Klean™ RP Series Filter Cartridge

Over het product

We manufacture Micro-Klean™ RP series filters with a rigid, graded porosity, all-polypropylene construction and an extrusion bonded technology. Benefits include increased surface areas for extended filter life along with high particle removal efficiency at high flow rates (flux).

Productopties

1- van Producten

Selecteer filters om uw productlijst te verfijnen

Productnaam Product-ID Totale lengte (imperiaal) OverallLengthMetric OverallDiameterImperial Totale diameter (metrisch) MicronRating Sectoren Productserie Trademark2 categoryName

Product-ID

7000104719

Totale lengte (imperiaal)

9.75 in

OverallLengthMetric

24.765 cm

OverallDiameterImperial

2.66 in

Totale diameter (metrisch)

6.756 cm

MicronRating

25 μm

Sectoren

Industrieel water,Productie

Productserie

Micro-Klean™ RP Series

Trademark2

Micro-Klean™

categoryName

Cilindrische dieptefilterkaarsen

Product-ID

7000104700

Totale lengte (imperiaal)

29.25 in

OverallLengthMetric

74.295 cm

OverallDiameterImperial

2.66 in

Totale diameter (metrisch)

6.756 cm

MicronRating

50 μm

Sectoren

Industrieel water,Productie

Productserie

Micro-Klean™ RP Series

Trademark2

Micro-Klean™

categoryName

Cilindrische dieptefilterkaarsen

Productdetails

Our rigid construction for the Micro-Klean™ RP series filter provides consistent performance, extended service life and fewer filter change-outs. Our manufacturing process provides a high degree of fibre-to-fibre thermal bonding, without the use of binders, to produce a rigid, core-less filter structure with the following properties:

  • Does not unload contaminants as differential pressure increases, as typical melt-blown filters may.
  • Grooves machined into the cartridge’s surface more than double the effective surface area, reducing premature blinding of the outer surface by large particles and gels.
  • Exhibits exceptionally low differential pressure for a given filter rating.
  • Continuous integral length filter element is easy to install and has no bond joints to break.

*Surfaces that are in contact with water are FDA CFR-21 compliant.

Micro-Klean™ RP series filters are suitable for a wide range of particle-control and equipment protection applications in the Food & Beverage and Pharmaceutical industries.

  • Longer service life, with fewer cartridge change-outs than non-rigid filters
  • Rigid construction helps protect against unloading of particles during service life
  • Grooved cartridge increases surface area for fuller utilization of the depth-matrix
  • Clean design, without adhesives, binders, surfactants, or lubricants
  • FDA CFR-21 Compliant Materials*

Productspecificaties

Industries
Industries

Industrieel water,Productie

Categorienaam
Categorienaam

Cilindrische dieptefilterkaarsen

Micronage
Micronage

50 μm, 25 μm

OverallLengthImperial
OverallLengthImperial

9.75 in

OverallDiameterMetric
OverallDiameterMetric

6.756 cm

Totale lengte (metrisch)
Totale lengte (metrisch)

24.765 cm

OverallDiameterImperial
OverallDiameterImperial

2.66 in

Totale diameter (metrisch)
Totale diameter (metrisch)

6.756 cm

categoryName
categoryName

Cilindrische dieptefilterkaarsen

Totale lengte (imperiaal)
Totale lengte (imperiaal)

29.25 in

OverallLengthMetric
OverallLengthMetric

74.295 cm

Merk
Merk

Micro-Klean™

GLBL_CAT_NBR
GLBL_CAT_NBR

RP29L18G20NN, RP09F18G20NN

Productserie
Productserie

Micro-Klean™ RP Series

Vraag een expert