3M™ Zeta Plus™ ZP Series Filter Housing
Tietoa tuotteesta
3M™ ZP Series Housings can be produced using a wide range of materials and construction codes. Our housings are designed for use with 3M™ Zeta Plus and 3M™ Zeta Carbon cartridges of 8”, 12” and 16” in diameter, with cartridge stacks up to four high.
Tuotteen tiedot
For most pharmaceutical (bio processing and advanced purity chemicals) and other processes where specialty grade materials and high levels of surface finish are required, use 3M™ ZP Series Housings.
Special builds
3M West Europe SPSD Hardware team has extensive experience designing and supplying special vessels for lenticular cartridges.
Our ZP series housings can be produced to a wide variety of design and construction codes (including ASME U Stamp). Special 3M ZP vessels can range from simple modifications of an existing design up to large multiple housing skid mounted units with associated accessories, and with both second shell heating jackets and electrical trace heating. These are produced for both bio-processing and advanced purity chemicals applications.
Multi-column designs are also available.
The information in the following sections is typical for these housings – please contact your local 3M SPSD representative for further information.
Operating conditions
- 3M ZP vessels typically have a design pressure rating of 10 bar g and can be used in temperatures up to 150 °C (for sterilisation).
- Actual operating temperatures will depend on the cartridge types and on the PED 2014/68/CE regulations that are applicable to pressure vessels.
Construction materials
- Special vessels for lenticular cartridges can be supplied in a wide variety of materials including 316L and low ferrite stainless steels (< 1% and < 3%) and C22 “Hastelloy” as well as super duplex grades.
Gaskets
- Silicone gaskets are supplied as standard. Other gasket materials are available and can be readily installed.
Inlet and outlet options
- A wide range of connections are available including tri-clover, flanged and threaded standards.
Surface finish
- These can include mechanical polished as well as electro-polished finishes. Surface quality Ra < 0,8µm or lower. Spray-balls with riboflavin certified cleaning are also routinely supplied.
Food compliance
- All 3M ZP housings can be made compliant with the requirements of Regulation (EC) 1935/2004 for food contact applications.
PED 2014/68/CE
- 3M ZP vessels are routinely produced for categories up to and including PED Cat IV.
ATEX 2014/34/CE
- All 3M ZP housings can be made compliant to ATEX condition II 2 GD IIC.
- A wide range of stainless steel construction grades provides excellent corrosion protection for rugged, long-lasting service
- Accepts varying height cartridges. Allows use of 1, 2, 3 or 4 standard height cartridges for greater flexibility for 8” 12” and 16” cartridges
- Swing bolt or screw clamp closures design optimises cartridge change-out
- Removable cartridge centre-post and sealing nut compression assembly allows easy cleaning reducing maintenance. Air vent allows venting before start-up and draining for safe filter operation
- Approved for food contact use – complies with European regulations
- Fully supported with a comprehensive range of readily available spares
Ehdotetut sovellukset
- Suitable for most pharmaceutical (bio processing and advanced purity chemicals) and other processes where specialty grade materials and high levels of surface finish are required
Tuotteen tekniset tiedot
| Industries |
Industries
Elintarvikkeiden ja juomien valmistus,Teollisuusvesi,Tuotantoteollisuus |
| Brändi |
Brändi
Zeta Plus™ |
| FilterType |
FilterType
Suodatinkotelo |
| Teollisuudenalat |
Teollisuudenalat
Elintarvikkeiden ja juomien valmistus,Teollisuusvesi,Tuotantoteollisuus |
| Category Name |
Category Name
Suodatinkotelot |
| Suodattimen tyyppi |
Suodattimen tyyppi
Suodatinkotelo |