Skip to main content

We've detected that you're visiting from United States of America. Would you like to switch languages for tailored content?

->

3M™ 740 Series Filter Cartridge

2 Products available

undefined

Hover over image to zoom

3M™ 740 Series Filter Cartridge

About the product

3M™ 740 Series Filter Cartridges are our large diameter, polypropylene microfibre pleated depth media cartridges for use in filter housings that accept 16.51 cm outside diameter and 101.6 cm length filter cartridges with 226 o-ring connections.

Product options

1-2 of 2 Products

Select Filters to narrow your product list

Product details

For high efficiency, outside to inside flow direction liquid filtration use 3M™ 740 Series Filter Cartridges. Designed for applications with high contaminant removal requirements our cartridges permit higher flow rates than standard 6.35 cm diameter products resulting in significantly fewer required filter cartridges for a given flow. 3M polypropylene microfibre forms the basis of the filtration media utilised in the 3M 740 Series Filter Cartridges. Our manufacturing processes allow for tightly controlled specifications resulting in a filter media with consistent and predictable particle retention characteristics. The microfibre media is pleated in a radial design (a 3M innovation) which optimises the usable surface area of the filter cartridges. 3M 740 Series Filter Cartridges utilise polypropylene end caps, outer sleeves and cores to protect the pleat structure integrity and provide a robust filter construction. A double o-ring seal design is incorporated to reduce the risk of fluid bypass. 3M 740 Series Filter Cartridges are offered in micron grades ranging from 1μm to 70 μm (at 99.9% particle removal efficiency).
  • Higher flow capacity per cartridge resulting in fewer cartridges required, reduced cartridge handling, and less individual cartridge seal points minimising chance of fluid bypass
  • Radial pleat design offers high contaminant capacity
  • Use of 3M microfibre filtration medias offers consistent and predictable filtration performance and high particle removal efficiencies throughout filter life
  • Easy to use with no special tools or hardware required for filter change-out
  • All polypropylene filter construction offers broad chemical compatibility

Suggested Applications

  • Use for process waters (pre-RO, cooling), machine coolants, chemicals, refining, ground/reclaimed/waste waters, well injection and produced waters

Product specifications

Industries
Industries

Chemical manufacturing,Industrial water,Manufacturing,Oil & gas

FlowRateMetric
FlowRateMetric

18 m³/hr

Product Form
Product Form

Cartridge

OverallDiameterMetric
OverallDiameterMetric

16.5 cm

OverallLengthImperial
OverallLengthImperial

40 in

ProductForm
ProductForm

Cartridge

OverallDiameterImperial
OverallDiameterImperial

6.5 in

Grade
Grade

740

Micron Rating (Absolute)
Micron Rating (Absolute)

25 absolute, @ 99.9%, 10 absolute, @ 99.9%

Flow Rate (Metric)
Flow Rate (Metric)

18 m³/hr

categoryName
categoryName

Pleated Membrane Cartridges

Flow Rate (Imperial)
Flow Rate (Imperial)

79.26 gal/min

FilterType
FilterType

Surface

OverallLengthMetric
OverallLengthMetric

101.6 cm

Overall Length (Imperial)
Overall Length (Imperial)

40 in

Product Type
Product Type

Pleated Non-Woven Media

End Modification
End Modification

226

ProductSeries
ProductSeries

740

FilterTechnology
FilterTechnology

Non-woven

Welcome to Solventum United Arab Emirates

The following content is for Health Care Professionals only.

Please verify that you are a Health Care Professional: